Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.27.21-170.2.56.fc10.i686 (mockbuild@xenbuilder2.fedora.redhat.com) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #1 SMP Mon Mar 23 23:37:54 EDT 2009 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000bf6d0000 (usable) BIOS-e820: 00000000bf6d0000 - 00000000bf6e3000 (ACPI NVS) BIOS-e820: 00000000bf6e3000 - 00000000c0000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000140000000 (usable) DMI present. last_pfn = 0xbf6d0 max_arch_pfn = 0x100000 x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 kernel direct mapping tables up to 38000000 @ 7000-c000 Using x86 segment limits to approximate NX protection RAMDISK: 37ce3000 - 37fef3f6 ACPI: RSDP 000F7600, 0024 (r2 DELL ) ACPI: XSDT BF6D6671, 009C (r1 DELL M08 6040000 LTP 0) ACPI: FACP BF6DEB60, 00F4 (r3 TOSCPL CRESTLNE 6040000 ALAN 1) ACPI: DSDT BF6D7C3B, 6EB1 (r2 TOSCPL CRESTLNE 6040000 INTL 20060608) ACPI: FACS BF6E2FC0, 0040 ACPI: APIC BF6DEC54, 0068 (r1 INTEL CRESTLNE 6040000 LOHR 5A) ACPI: HPET BF6DECBC, 0038 (r1 INTEL CRESTLNE 6040000 LOHR 5A) ACPI: MCFG BF6DECF4, 003C (r1 INTEL CRESTLNE 6040000 LOHR 5A) ACPI: TCPA BF6DED30, 0032 (r1 Intel CRESTLNE 6040000 LOHR 5A) ACPI: TMOR BF6DED62, 0026 (r1 PTLTD 6040000 PTL 3) ACPI: OSFR BF6DED88, 0072 (r1 TOSHIB A+2nd ID 6040000 TASM 4010000) ACPI: APIC BF6DEDFA, 0068 (r1 PTLTD APIC 6040000 LTP 0) ACPI: BOOT BF6DEE62, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) ACPI: SLIC BF6DEE8A, 0176 (r1 DELL M08 6040000 LTP 0) ACPI: SSDT BF6D798E, 02AD (r1 SataRe SataAhci 1000 INTL 20061109) ACPI: SSDT BF6D78EB, 00A3 (r1 BrtRef DD01BRT 1000 INTL 20061109) ACPI: SSDT BF6D6C99, 025F (r1 PmRef Cpu0Tst 3000 INTL 20061109) ACPI: SSDT BF6D6BF3, 00A6 (r1 PmRef Cpu1Tst 3000 INTL 20061109) ACPI: SSDT BF6D670D, 04E6 (r1 PmRef CpuPm 3000 INTL 20061109) ACPI: BIOS bug: multiple APIC/MADT found, using 0 ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org 2166MB HIGHMEM available. 896MB LOWMEM available. mapped low ram: 0 - 38000000 low ram: 00000000 - 38000000 bootmap 00008000 - 0000f000 (9 early reservations) ==> bootmem [0000000000 - 0038000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] #3 [0000400000 - 000097712c] TEXT DATA BSS ==> [0000400000 - 000097712c] #4 [0037ce3000 - 0037fef3f6] RAMDISK ==> [0037ce3000 - 0037fef3f6] #5 [0000978000 - 000097c000] INIT_PG_TABLE ==> [0000978000 - 000097c000] #6 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] #7 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] found SMP MP-table at [c00f7680] 000f7680 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x00038000 HighMem 0x00038000 -> 0x000bf6d0 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x000bf6d0 On node 0 totalpages: 783983 free_area_init_node: node 0, pgdat c07f7b00, node_mem_map c1000000 DMA zone: 3967 pages, LIFO batch:0 Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 550370 pages, LIFO batch:31 Using APIC driver default ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information SMP: Allowing 2 CPUs, 0 hotplug CPUs mapped APIC to ffffb000 (fee00000) mapped IOAPIC to ffffa000 (fec00000) PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000 PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 Allocating PCI resources starting at c2000000 (gap: c0000000:20000000) PERCPU: Allocating 41372 bytes of per cpu data NR_CPUS: 32, nr_cpu_ids: 2, nr_node_ids 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 777857 Kernel command line: ro root=UUID=989f5da0-0c48-4083-8b7f-fca0072e0835 i8042.reset Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c08a4000 soft=c0884000 PID hash table entries: 4096 (order: 12, 16384 bytes) Extended CMOS year: 2000 TSC: PIT calibration confirmed by PMTIMER. TSC: using PIT calibration value Detected 2493.717 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 3100776k/3136320k available (2747k kernel code, 34288k reserved, 1425k data, 416k init, 2218816k highmem) virtual kernel memory layout: fixmap : 0xffc57000 - 0xfffff000 (3744 kB) pkmap : 0xff400000 - 0xff800000 (4096 kB) vmalloc : 0xf8800000 - 0xff3fe000 ( 107 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc0819000 - 0xc0881000 ( 416 kB) .data : 0xc06aeed6 - 0xc0813618 (1425 kB) .text : 0xc0400000 - 0xc06aeed6 (2747 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. CPA: page pool initialized 1 of 1 pages preallocated SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 hpet clockevent registered Calibrating delay loop (skipped), value calculated using timer frequency.. 4987.43 BogoMIPS (lpj=2493717) Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode Mount-cache hash table entries: 512 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys devices CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. using mwait in idle threads. Checking 'hlt' instruction... OK. ACPI: Core revision 20080609 ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 Duo CPU T9300 @ 2.50GHz stepping 06 CPU 1 irqstacks, hard=c08a5000 soft=c0885000 Booting processor 1/1 ip 6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 4987.23 BogoMIPS (lpj=2493617) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: Intel(R) Core(TM)2 Duo CPU T9300 @ 2.50GHz stepping 06 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs Total of 2 processors activated (9974.66 BogoMIPS). sizeof(vma)=84 bytes sizeof(page)=32 bytes sizeof(inode)=340 bytes sizeof(dentry)=132 bytes sizeof(ext3inode)=492 bytes sizeof(buffer_head)=56 bytes sizeof(skbuff)=184 bytes sizeof(task_struct)=3268 bytes CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 net_namespace: 840 bytes Booting paravirtualized kernel on bare hardware Time: 10:43:55 Date: 04/12/09 NET: Registered protocol family 16 No dock devices found. ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in E820 PCI: Using MMCONFIG for extended config space PCI: Using configuration type 1 for base access ACPI: EC: Look up EC in DSDT ACPI: BIOS _OSI(Linux) query ignored ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: non-query interrupt received, switching to interrupt mode ACPI: EC: GPE storm detected, transactions will use polling mode ACPI: EC: missing confirmations, switch off interrupt mode. ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in poll mode ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: 0000:00:02.0 reg 10 64bit mmio: [f8000000, f80fffff] PCI: 0000:00:02.0 reg 18 64bit mmio: [d0000000, dfffffff] PCI: 0000:00:02.0 reg 20 io port: [1800, 1807] PCI: 0000:00:02.1 reg 10 64bit mmio: [f8100000, f81fffff] PCI: 0000:00:1a.0 reg 20 io port: [1820, 183f] PCI: 0000:00:1a.1 reg 20 io port: [1840, 185f] PCI: 0000:00:1a.7 reg 10 32bit mmio: [f8504800, f8504bff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled PCI: 0000:00:1b.0 reg 10 64bit mmio: [f8500000, f8503fff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold pci 0000:00:1c.3: PME# disabled pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold pci 0000:00:1c.4: PME# disabled PCI: 0000:00:1d.0 reg 20 io port: [1860, 187f] PCI: 0000:00:1d.1 reg 20 io port: [1880, 189f] PCI: 0000:00:1d.2 reg 20 io port: [18a0, 18bf] PCI: 0000:00:1d.7 reg 10 32bit mmio: [f8504c00, f8504fff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO PCI: 0000:00:1f.1 reg 10 io port: [0, 7] PCI: 0000:00:1f.1 reg 14 io port: [0, 3] PCI: 0000:00:1f.1 reg 18 io port: [0, 7] PCI: 0000:00:1f.1 reg 1c io port: [0, 3] PCI: 0000:00:1f.1 reg 20 io port: [1810, 181f] PCI: 0000:00:1f.2 reg 10 io port: [1c00, 1c07] PCI: 0000:00:1f.2 reg 14 io port: [18d4, 18d7] PCI: 0000:00:1f.2 reg 18 io port: [18d8, 18df] PCI: 0000:00:1f.2 reg 1c io port: [18d0, 18d3] PCI: 0000:00:1f.2 reg 20 io port: [18e0, 18ff] PCI: 0000:00:1f.2 reg 24 32bit mmio: [f8504000, f85047ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled PCI: 0000:00:1f.3 reg 10 32bit mmio: [0, ff] PCI: 0000:00:1f.3 reg 20 io port: [1c20, 1c3f] PCI: bridge 0000:00:1c.0 io port: [2000, 2fff] PCI: bridge 0000:00:1c.0 32bit mmio: [c4000000, c7ffffff] PCI: bridge 0000:00:1c.0 64bit mmio pref: [cc000000, cdffffff] PCI: bridge 0000:00:1c.1 io port: [3000, 3fff] PCI: bridge 0000:00:1c.1 32bit mmio: [f0000000, f3ffffff] PCI: bridge 0000:00:1c.1 64bit mmio pref: [fa000000, fbffffff] PCI: 0000:06:00.0 reg 10 64bit mmio: [f4000000, f4003fff] pci 0000:06:00.0: supports D1 pci 0000:06:00.0: supports D2 pci 0000:06:00.0: PME# supported from D0 D3hot D3cold pci 0000:06:00.0: PME# disabled PCI: bridge 0000:00:1c.3 io port: [4000, 4fff] PCI: bridge 0000:00:1c.3 32bit mmio: [f4000000, f7ffffff] PCI: bridge 0000:00:1c.3 64bit mmio pref: [fc000000, fdffffff] PCI: 0000:07:00.0 reg 10 io port: [5000, 50ff] PCI: 0000:07:00.0 reg 18 64bit mmio: [f8610000, f8610fff] PCI: 0000:07:00.0 reg 20 64bit mmio: [f8600000, f860ffff] PCI: 0000:07:00.0 reg 30 32bit mmio: [0, ffff] pci 0000:07:00.0: supports D1 pci 0000:07:00.0: supports D2 pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:07:00.0: PME# disabled PCI: bridge 0000:00:1c.4 io port: [5000, 5fff] PCI: bridge 0000:00:1c.4 64bit mmio pref: [f8600000, f86fffff] PCI: 0000:08:05.0 reg 10 32bit mmio: [f8200000, f8200fff] PCI: 0000:08:05.0 reg 14 32bit mmio: [f8202000, f82027ff] pci 0000:08:05.0: supports D1 pci 0000:08:05.0: supports D2 pci 0000:08:05.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:08:05.0: PME# disabled PCI: 0000:08:05.2 reg 10 32bit mmio: [f8202800, f82028ff] pci 0000:08:05.2: supports D1 pci 0000:08:05.2: supports D2 pci 0000:08:05.2: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:08:05.2: PME# disabled PCI: 0000:08:05.3 reg 10 32bit mmio: [f8201000, f8201fff] pci 0000:08:05.3: supports D1 pci 0000:08:05.3: supports D2 pci 0000:08:05.3: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:08:05.3: PME# disabled pci 0000:00:1e.0: transparent bridge PCI: bridge 0000:00:1e.0 32bit mmio: [f8200000, f82fffff] bus 00 -> node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 10 devices ACPI: ACPI bus type pnp unregistered SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 64-bit timers, 14318180 Hz Switched to high resolution mode on CPU 0 tracer: 772 pages allocated for 65536 entries of 48 bytes Switched to high resolution mode on CPU 1 actual entries 65620 ACPI: RTC can wake from S4 system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved system 00:01: iomem range 0xfed20000-0xfed3ffff could not be reserved system 00:01: iomem range 0xfed40000-0xfed44fff could not be reserved system 00:01: iomem range 0xfed45000-0xfed8ffff could not be reserved system 00:04: iomem range 0xfed00000-0xfed003ff could not be reserved system 00:06: ioport range 0x680-0x69f has been reserved system 00:06: ioport range 0x800-0x80f has been reserved system 00:06: ioport range 0x1000-0x107f has been reserved system 00:06: ioport range 0x1180-0x11bf has been reserved system 00:06: ioport range 0xfe00-0xfe00 has been reserved system 00:06: ioport range 0xff00-0xff7f has been reserved pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 pci 0000:00:1c.0: IO window: 0x2000-0x2fff pci 0000:00:1c.0: MEM window: 0xc4000000-0xc7ffffff pci 0000:00:1c.0: PREFETCH window: 0x000000cc000000-0x000000cdffffff pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03 pci 0000:00:1c.1: IO window: 0x3000-0x3fff pci 0000:00:1c.1: MEM window: 0xf0000000-0xf3ffffff pci 0000:00:1c.1: PREFETCH window: 0x000000fa000000-0x000000fbffffff pci 0000:00:1c.3: PCI bridge, secondary bus 0000:06 pci 0000:00:1c.3: IO window: 0x4000-0x4fff pci 0000:00:1c.3: MEM window: 0xf4000000-0xf7ffffff pci 0000:00:1c.3: PREFETCH window: 0x000000fc000000-0x000000fdffffff pci 0000:00:1c.4: PCI bridge, secondary bus 0000:07 pci 0000:00:1c.4: IO window: 0x5000-0x5fff pci 0000:00:1c.4: MEM window: 0xc2000000-0xc20fffff pci 0000:00:1c.4: PREFETCH window: 0x000000f8600000-0x000000f86fffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:08 pci 0000:00:1e.0: IO window: disabled pci 0000:00:1e.0: MEM window: 0xf8200000-0xf82fffff pci 0000:00:1e.0: PREFETCH window: disabled pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.1: setting latency timer to 64 pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 pci 0000:00:1c.3: setting latency timer to 64 pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.4: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [0, ffffffffffffffff] bus: 02 index 0 io port: [2000, 2fff] bus: 02 index 1 mmio: [c4000000, c7ffffff] bus: 02 index 2 mmio: [cc000000, cdffffff] bus: 02 index 3 mmio: [0, 0] bus: 03 index 0 io port: [3000, 3fff] bus: 03 index 1 mmio: [f0000000, f3ffffff] bus: 03 index 2 mmio: [fa000000, fbffffff] bus: 03 index 3 mmio: [0, 0] bus: 06 index 0 io port: [4000, 4fff] bus: 06 index 1 mmio: [f4000000, f7ffffff] bus: 06 index 2 mmio: [fc000000, fdffffff] bus: 06 index 3 mmio: [0, 0] bus: 07 index 0 io port: [5000, 5fff] bus: 07 index 1 mmio: [c2000000, c20fffff] bus: 07 index 2 mmio: [f8600000, f86fffff] bus: 07 index 3 mmio: [0, 0] bus: 08 index 0 mmio: [0, 0] bus: 08 index 1 mmio: [f8200000, f82fffff] bus: 08 index 2 mmio: [0, 0] bus: 08 index 3 io port: [0, ffff] bus: 08 index 4 mmio: [0, ffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 checking if image is initramfs... it is Freeing initrd memory: 3120k freed Simple Boot Flag at 0x36 set to 0x1 apm: BIOS not found. audit: initializing netlink socket (disabled) type=2000 audit(1239533036.056:1): initialized highmem bounce pool size: 64 pages HugeTLB registered 4 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) msgmni has been set to 1730 SELinux: Registering netfilter hooks Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:00:02.0: Boot video device pcieport-driver 0000:00:1c.0: setting latency timer to 64 pcieport-driver 0000:00:1c.0: found MSI capability pci_express 0000:00:1c.0:pcie00: allocate port service pci_express 0000:00:1c.0:pcie02: allocate port service pci_express 0000:00:1c.0:pcie03: allocate port service pcieport-driver 0000:00:1c.1: setting latency timer to 64 pcieport-driver 0000:00:1c.1: found MSI capability pci_express 0000:00:1c.1:pcie00: allocate port service pci_express 0000:00:1c.1:pcie02: allocate port service pci_express 0000:00:1c.1:pcie03: allocate port service pcieport-driver 0000:00:1c.3: setting latency timer to 64 pcieport-driver 0000:00:1c.3: found MSI capability pci_express 0000:00:1c.3:pcie00: allocate port service pci_express 0000:00:1c.3:pcie02: allocate port service pci_express 0000:00:1c.3:pcie03: allocate port service pcieport-driver 0000:00:1c.4: setting latency timer to 64 pcieport-driver 0000:00:1c.4: found MSI capability pci_express 0000:00:1c.4:pcie00: allocate port service pci_express 0000:00:1c.4:pcie02: allocate port service pci_express 0000:00:1c.4:pcie03: allocate port service pci_hotplug: PCI Hot Plug PCI Core version: 0.5 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 acpiphp_glue: can't get bus number, assuming 0 ACPI: AC Adapter [ACAD] (on-line) ACPI: Battery Slot [BAT1] (battery present) input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 ACPI: Power Button (FF) [PWRF] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 ACPI: Lid Switch [LID0] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 ACPI: Power Button (CM) [PWRB] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3 ACPI: Sleep Button (CM) [SLPB] ACPI: SSDT BF6D7567, 02BC (r1 PmRef Cpu0Ist 3000 INTL 20061109) ACPI: SSDT BF6D6EF8, 05EA (r1 PmRef Cpu0Cst 3001 INTL 20061109) Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state Monitor-Mwait will be used to enter C-3 state ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) processor ACPI0007:00: registered as cooling_device0 ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: SSDT BF6D7823, 00C8 (r1 PmRef Cpu1Ist 3000 INTL 20061109) ACPI: SSDT BF6D74E2, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20061109) ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) processor ACPI0007:01: registered as cooling_device1 ACPI: Processor [CPU1] (supports 8 throttling states) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found hpet_resources: 0xfed00000 is busy Non-volatile memory driver v1.2 Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel 965GM Chipset agpgart-intel 0000:00:00.0: detected 7676K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 Serial: 8250/16550 driver4 ports, IRQ sharing enabled brd: module loaded loop: module loaded input: Macintosh mouse button emulation as /devices/virtual/input/input4 Driver 'sd' needs updating - please use bus_type methods Driver 'sr' needs updating - please use bus_type methods ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: PCI INT B -> GSI 18 (level, low) -> IRQ 18 ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 18 ata2: SATA max UDMA/133 abar m2048@0xf8504000 port 0xf8504180 irq 18 ata3: SATA max UDMA/133 abar m2048@0xf8504000 port 0xf8504200 irq 18 ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: _GTF unexpected object type 0x1 ata1.00: ATA-8: WDC WD3200BEVT-75ZCT2, 11.01A11, max UDMA/133 ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32) ata1.00: _GTF unexpected object type 0x1 ata1.00: configured for UDMA/133 ata2: SATA link down (SStatus 0 SControl 300) ata3: SATA link down (SStatus 0 SControl 300) scsi 0:0:0:0: Direct-Access ATA WDC WD3200BEVT-7 11.0 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sd 0:0:0:0: [sda] Attached SCSI disk sd 0:0:0:0: Attached scsi generic sg0 type 0 ata_piix 0000:00:1f.1: version 2.12 ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ata_piix 0000:00:1f.1: setting latency timer to 64 scsi3 : ata_piix scsi4 : ata_piix ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14 ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15 ata4.00: ATAPI: MATSHITA DVD+/-RW UJ-875S, D200, max UDMA/33 ata4.00: configured for UDMA/33 scsi 3:0:0:0: CD-ROM MATSHITA DVD+-RW UJ-875S D200 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda caddy Uniform CD-ROM driver Revision: 3.20 sr 3:0:0:0: Attached scsi CD-ROM sr0 sr 3:0:0:0: Attached scsi generic sg1 type 5 ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf8504800 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.27.21-170.2.56.fc10.i686 ehci_hcd usb usb1: SerialNumber: 0000:00:1a.7 ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8504c00 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 2.6.27.21-170.2.56.fc10.i686 ehci_hcd usb usb2: SerialNumber: 0000:00:1d.7 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver USB Universal Host Controller Interface driver v3.0 uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820 usb 1-3: new high speed USB device using ehci_hcd and address 3 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected usb 1-3: configuration #1 chosen from 1 choice usb 1-3: New USB device found, idVendor=0c45, idProduct=63e0 usb 1-3: New USB device strings: Mfr=2, Product=1, SerialNumber=3 usb 1-3: Product: Integrated Webcam usb 1-3: Manufacturer: SONiX Technology Inc usb 1-3: SerialNumber: M09-001 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.27.21-170.2.56.fc10.i686 uhci_hcd usb usb3: SerialNumber: 0000:00:1a.0 uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb 3-2: new full speed USB device using uhci_hcd and address 2 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.27.21-170.2.56.fc10.i686 uhci_hcd usb usb4: SerialNumber: 0000:00:1a.1 uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected usb 3-2: configuration #1 chosen from 1 choice usb 3-2: New USB device found, idVendor=413c, idProduct=8140 usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.27.21-170.2.56.fc10.i686 uhci_hcd usb usb5: SerialNumber: 0000:00:1d.0 uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: UHCI Host Controller usb usb6: Manufacturer: Linux 2.6.27.21-170.2.56.fc10.i686 uhci_hcd usb usb6: SerialNumber: 0000:00:1d.1 uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb7: Product: UHCI Host Controller usb usb7: Manufacturer: Linux 2.6.27.21-170.2.56.fc10.i686 uhci_hcd usb usb7: SerialNumber: 0000:00:1d.2 PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, hpet irqs device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com cpuidle: using governor ladder cpuidle: using governor menu Marking TSC unstable due to TSC halts in idle usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver nf_conntrack version 0.5.0 (16384 buckets, 65536 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Plase use nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 Using IPI No-Shortcut mode registered taskstats version 1 Magic number: 5:631:729 Freeing unused kernel memory: 416k freed Write protecting the kernel text: 2748k Write protecting the kernel read-only data: 1180k kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks type=1404 audit(1239533042.566:2): selinux=0 auid=4294967295 ses=4294967295 input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input6 input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input7 udevd version 127 started ACPI: WMI: Mapper loaded ieee80211_crypt: registered algorithm 'NULL' dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) iTCO_vendor_support: vendor-support=0 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008) iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) input: PC Speaker as /devices/platform/pcspkr/input/input8 i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ACPI: I/O resource 0000:00:1f.3 [0x1c20-0x1c3f] conflicts with ACPI region SMBI [0x1c20-0x1c2f] ACPI: Device needs an ACPI driver Linux video capture interface: v2.00 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded r8169 0000:07:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 r8169 0000:07:00.0: setting latency timer to 64 r8169 0000:07:00.0: no MSI. Back to INTx. eth0: RTL8168c/8111c at 0xf8908000, 00:21:70:cb:08:5d, XID 3c4000c0 IRQ 16 acpi device:05: registered as cooling_device2 input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/device:03/input/input9 ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) uvcvideo: Found UVC 1.00 device Integrated Webcam (0c45:63e0) uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround. input: Integrated Webcam as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3:1.0/input/input10 acpi device:0a: registered as cooling_device3 input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:07/input/input11 usbcore: registered new interface driver uvcvideo USB Video Class driver (v0.1.0) firewire_ohci 0000:08:05.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 Bluetooth: Core ver 2.13 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) wl: module license '' taints kernel. sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman firewire_ohci: Added fw-ohci device 0000:08:05.0, OHCI version 1.10 wl 0000:06:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 wl 0000:06:00.0: setting latency timer to 64 Bluetooth: Generic Bluetooth USB driver ver 0.3 usbcore: registered new interface driver btusb ieee80211_crypt: registered algorithm 'TKIP' eth1: Broadcom BCM4315 802.11 Wireless Controller 5.10.79.10 sdhci-pci 0000:08:05.2: SDHCI controller found [1217:7120] (rev 2) sdhci-pci 0000:08:05.2: PCI INT A -> GSI 22 (level, low) -> IRQ 22 mmc0: Unknown controller version (2). You may experience problems. Registered led device: mmc0:: mmc0: SDHCI controller on PCI [0000:08:05.2] using DMA HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 HDA Intel 0000:00:1b.0: setting latency timer to 64 hda_codec: Unknown model for ALC268, trying auto-probe from BIOS... ALSA sound/pci/hda/hda_codec.c:3021: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:3025: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:3029: hp_outs=1 (0x15/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:3030: mono: mono_out=0x0 ALSA sound/pci/hda/hda_codec.c:3038: inputs: mic=0x12, fmic=0x18, line=0x0, fline=0x0, cd=0x0, aux=0x0 firewire_core: created device fw0: GUID 00000010a000b000, S400 device-mapper: multipath: version 1.0.5 loaded EXT3 FS on sda1, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda2, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 2048276k swap on /dev/sda3. Priority:-1 extents:1 across:2048276k Clocksource tsc unstable (delta = -67554107 ns) NET: Registered protocol family 10 lo: Disabled Privacy Extensions Bluetooth: L2CAP ver 2.11 Bluetooth: L2CAP socket layer initialized Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: BNEP filters: protocol multicast Bridge firewalling registered Bluetooth: SCO (Voice Link) ver 0.6 Bluetooth: SCO socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.10 [drm] Initialized drm 1.1.0 20060810 pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:02.0: setting latency timer to 64 [drm] Initialized i915 1.6.0 20080730 on minor 0 mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining eth1: no IPv6 routers present CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 fuse init (API version 7.9) CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 CE: hpet increasing min_delta_ns to 15000 nsec CE: hpet increasing min_delta_ns to 22500 nsec CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 domain 1: span 0-1 level CPU groups: 0-1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 domain 1: span 0-1 level CPU groups: 0-1 CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 usb 2-1: new high speed USB device using ehci_hcd and address 2 usb 2-1: configuration #1 chosen from 1 choice usb 2-1: New USB device found, idVendor=054c, idProduct=0010 usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-1: Product: Sony DSC usb 2-1: Manufacturer: Sony Initializing USB Mass Storage driver... scsi5 : SCSI emulation for USB Mass Storage devices usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usb-storage: device found at 2 usb-storage: waiting for device to settle before scanning usb-storage: device scan complete scsi 5:0:0:0: Direct-Access Sony Sony DSC 6.00 PQ: 0 ANSI: 0 CCS sd 5:0:0:0: [sdb] 3895296 512-byte hardware sectors (1994 MB) sd 5:0:0:0: [sdb] Write Protect is off sd 5:0:0:0: [sdb] Mode Sense: 00 00 00 00 sd 5:0:0:0: [sdb] Assuming drive cache: write through sd 5:0:0:0: [sdb] 3895296 512-byte hardware sectors (1994 MB) sd 5:0:0:0: [sdb] Write Protect is off sd 5:0:0:0: [sdb] Mode Sense: 00 00 00 00 sd 5:0:0:0: [sdb] Assuming drive cache: write through sdb: sdb1 sd 5:0:0:0: [sdb] Attached SCSI removable disk sd 5:0:0:0: Attached scsi generic sg2 type 0 usb 2-1: USB disconnect, address 2 CE: hpet increasing min_delta_ns to 33750 nsec