Linux version 2.6.5-mm1 (root@linuxguru) (gcc version 3.3.5 (Gentoo Linux 3.3.5-r1, ssp-3.3.2-3, pie-8.7.7.1)) #3 Wed Mar 9 01:06:31 IST 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001ff60000 (usable) BIOS-e820: 000000001ff60000 - 000000001ff78000 (ACPI data) BIOS-e820: 000000001ff78000 - 000000001ff7a000 (ACPI NVS) BIOS-e820: 000000001ff80000 - 0000000020000000 (reserved) BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) 511MB LOWMEM available. On node 0 totalpages: 130912 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 126816 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 DMI present. IBM machine detected. Enabling interrupts during APM calls. IBM machine detected. Disabling SMBus accesses. ACPI: RSDP (v002 IBM ) @ 0x000f6b40 ACPI: XSDT (v001 IBM TP-1R 0x00002120 LTP 0x00000000) @ 0x1ff6c263 ACPI: FADT (v003 IBM TP-1R 0x00002120 IBM 0x00000001) @ 0x1ff6c300 ACPI: SSDT (v001 IBM TP-1R 0x00002120 MSFT 0x0100000e) @ 0x1ff6c4b4 ACPI: ECDT (v001 IBM TP-1R 0x00002120 IBM 0x00000001) @ 0x1ff77e26 ACPI: TCPA (v001 IBM TP-1R 0x00002120 PTL 0x00000001) @ 0x1ff77e78 ACPI: BOOT (v001 IBM TP-1R 0x00002120 LTP 0x00000001) @ 0x1ff77fd8 ACPI: DSDT (v001 IBM TP-1R 0x00002120 MSFT 0x0100000e) @ 0x00000000 Built 1 zonelists Local APIC disabled by BIOS -- reenabling. Found and enabled local APIC! Initializing CPU#0 Kernel command line: root=/dev/hda3 vga=791 psmouse.proto=imps video=vesafb:ywrap,mtrr PID hash table entries: 2048 (order 11: 16384 bytes) Detected 1395.772 MHz processor. Using tsc for high-res timesource Console: colour dummy device 80x25 Memory: 514464k/523648k available (2764k kernel code, 8396k reserved, 996k data, 160k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 2760.70 BogoMIPS Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) checking if image is initramfs...it isn't (ungzip failed); looks like an initrd Freeing initrd memory: 40k freed CPU: After generic identify, caps: a7e9fbbf 00000000 00000000 00000000 CPU: After vendor identify, caps: a7e9fbbf 00000000 00000000 00000000 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 1024K CPU: After all inits, caps: a7e9fbbf 00000000 00000000 00000040 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: Intel(R) Pentium(R) M processor 1400MHz stepping 05 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1395.0266 MHz. ..... host bus clock speed is 99.0661 MHz. NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfd8d6, last bus=8 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040326 ACPI: IRQ9 SCI: Edge set to Level Trigger. ACPI: Found ECDT ACPI-0179: *** Warning: The ACPI AML in your computer contains errors, please nag the manufacturer to correct it. ACPI-0182: *** Warning: Allowing relaxed access to fields; turn on CONFIG_ACPI_DEBUG for details. ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: Embedded Controller [EC] (gpe 28) ACPI: Power Resource [PUBS] (on) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] Linux Plug and Play Support v0.97 (c) Adam Belay SCSI subsystem initialized Linux Kernel Card Services options: [pci] [cardbus] [pm] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 PCI: Using ACPI for IRQ routing PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' vesafb: framebuffer at 0xe0000000, mapped to 0xe0815000, size 16384k vesafb: mode is 1024x768x16, linelength=2048, pages=20 vesafb: protected mode interface info at c000:570c vesafb: pmi: set display start = c00c57a0, set palette = c00c57ec vesafb: pmi: ports = 3010 3016 3054 3038 303c 305c 3000 3004 30b0 30b2 30b4 vesafb: scrolling: ywrap using protected mode interface, yres_virtual=8192 vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0 fb0: VESA VGA frame buffer device Simple Boot Flag at 0x35 set to 0x1 Machine check exception polling timer started. gx-suspmod: error: no MediaGX/Geode processor found! apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: overridden by ACPI. ikconfig 0.7 with /proc/config* devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x0 Installing knfsd (copyright (C) 1996 okir@monad.swb.de). udf: registering filesystem SGI XFS with large block numbers, no debug enabled Initializing Cryptographic API ACPI: AC Adapter [AC] (on-line) ACPI: Battery Slot [BAT0] (battery present) ACPI: Power Button (FF) [PWRF] ACPI: Lid Switch [LID] ACPI: Sleep Button (CM) [SLPB] ACPI: Processor [CPU] (supports C1 C2 C3, 8 throttling states) ACPI: Thermal Zone [THM0] (41 C) bootsplash 3.1.4-2004/02/19: looking for picture.... silentjpeg size 21768 bytes, found (1024x768, 20089 bytes, v3). Console: switching to colour frame buffer device 122x40 Real Time Clock Driver v1.12 Non-volatile memory driver v1.2 hw_random hardware driver 1.0.0 loaded Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled Using anticipatory io scheduler Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize loop: loaded (max 8 devices) Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH4: IDE controller at PCI slot 0000:00:1f.1 PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) ICH4: chipset revision 1 ICH4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1860-0x1867, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x1868-0x186f, BIOS settings: hdc:DMA, hdd:pio hda: HTS548040M9AT00, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: UJDA755zDVD/CDRW, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: Host Protected Area detected. current capacity is 71123954 sectors (36415 MB) native capacity is 78140160 sectors (40007 MB) hda: 71123954 sectors (36415 MB) w/7877KiB Cache, CHS=65535/16/63, UDMA(100) /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 Yenta: CardBus bridge found at 0000:02:00.0 [1014:0552] Yenta: ISA IRQ mask 0x04b8, PCI irq 11 Socket status: 30000086 Yenta: CardBus bridge found at 0000:02:00.1 [1014:0552] Yenta: ISA IRQ mask 0x04b8, PCI irq 11 Socket status: 30000086 mice: PS/2 mouse device common for all mice serio: i8042 AUX port at 0x60,0x64 irq 12 input: PS/2 Synaptics TouchPad on isa0060/serio1 serio: i8042 KBD port at 0x60,0x64 irq 1 input: AT Translated Set 2 keyboard on isa0060/serio0 NET: Registered protocol family 2 IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 65536) NET: Registered protocol family 1 NET: Registered protocol family 17 cpufreq: P4/Xeon(TM) CPU On-Demand Clock Modulation available cpufreq: Warning: Pentium M detected. The speedstep_centrino module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible. ACPI: (supports S0 S3 S4 S5) Saved root name /dev/hda3 RAMDISK: Couldn't find valid RAM disk image starting at 0. found reiserfs format "3.6" with standard journal reiserfs: using ordered data mode Reiserfs journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 reiserfs: checking transaction log (hda3) for (hda3) Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly. Freeing unused kernel memory: 160k freed Adding 982792k swap on /dev/hda2. Priority:-1 extents:1 usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Setting latency timer of device 0000:00:1f.5 to 64 intel8x0_measure_ac97_clock: measured 49451 usecs intel8x0: clocking to 48000 Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected an Intel 855PM Chipset. agpgart: Maximum main memory to use for agp memory: 439M agpgart: AGP aperture is 256M @ 0xd0000000 driverloader: module license 'see LICENSE file; Copyright (c)2003-2004 Linuxant inc.' taints kernel. eth0: New link status: Disconnected (0002) eth0: WPA, TKIP, WEP128, WEP64 supported eth0: Intel(R) PRO/Wireless 7100 LAN Card Driver at 0000:02:02.0 (MAC address 00:0C:F1:16:2A:B4) ready cs: IO port probe 0x0c00-0x0cff: clean. cs: IO port probe 0x0800-0x08ff: clean. cs: IO port probe 0x0100-0x04ff: excluding 0x3b8-0x3df 0x4d0-0x4d7 cs: IO port probe 0x0a00-0x0aff: clean. USB Universal Host Controller Interface driver v2.2 uhci_hcd 0000:00:1d.0: Intel Corp. 82801DB USB (Hub #1) PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: irq 11, io base 00001800 uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: Intel Corp. 82801DB USB (Hub #2) PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: irq 11, io base 00001820 uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: Intel Corp. 82801DB USB (Hub #3) PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: irq 11, io base 00001840 uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ehci_hcd 0000:00:1d.7: Intel Corp. 82801DB USB2 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: irq 11, pci mem e1a0c000 ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29 hub 4-0:1.0: USB hub found hub 4-0:1.0: 6 ports detected slamr: module license 'Smart Link Ltd.' taints kernel. slamr: SmartLink AMRMO modem. slamr: probe 8086:24c6 ICH4 card... PCI: Setting latency timer of device 0000:00:1f.6 to 64 slamr: mc97 codec is SIL27 slamr: slamr0 is ICH4 card. devfs_mk_dev: could not append to parent for slamr0 Intel(R) PRO/1000 Network Driver - version 5.2.30.1-k2 Copyright (c) 1999-2004 Intel Corporation. eth1: Intel(R) PRO/1000 Network Connection ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ohci_hcd: block sizes: ed 64 td 64 bootsplash 3.1.4-2004/02/19: looking for picture.... found (1024x768, 20089 bytes, v3). bootsplash: status on console 0 changed to on bootsplash 3.1.4-2004/02/19: looking for picture.... found (1024x768, 20089 bytes, v3). bootsplash: status on console 1 changed to on bootsplash 3.1.4-2004/02/19: looking for picture.... found (1024x768, 20089 bytes, v3). bootsplash: status on console 2 changed to on bootsplash 3.1.4-2004/02/19: looking for picture.... found (1024x768, 20089 bytes, v3). bootsplash: status on console 3 changed to on bootsplash 3.1.4-2004/02/19: looking for picture.... found (1024x768, 20089 bytes, v3). bootsplash: status on console 4 changed to on bootsplash 3.1.4-2004/02/19: looking for picture.... found (1024x768, 20089 bytes, v3). bootsplash: status on console 5 changed to on mtrr: 0xe0000000,0x2000000 overlaps existing 0xe0000000,0x1000000 e1000: eth1 NIC Link is Up 100 Mbps Full Duplex