tftp 0x30f00000 bootpImage
TFTP from server 192.168.1.16; our IP address is 192.168.1.99
Filename 'bootpImage'.
Load address: 0x30f00000
Loading: *#################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #########
done
Bytes transferred = 2042054 (1f28c6 hex)
LN2410SBC # go 0x30f00000
## Starting application at 0x30F00000 ...
Uncompressing Linux................................... done, booting the kernel.
Linux version 2.6.16 (shaks@debian) (gcc version 3.4.3 (release) (CodeSourcery ARM Q1B 2005)) #1 Sun Apr 23 17:27:44 IST 2006
CPU: ARM920Tid(wb) [41129200] revision 0 (ARMv4T)
Machine: LN2410SBC
Memory policy: ECC disabled, Data cache writeback
CPU S3C2410A (id 0x32410002)
MM: invalid domain in supersection mapping for 0x8000000000 at 0xf1300000
S3C2410: core 202.800 MHz, memory 101.400 MHz, peripheral 50.700 MHz
S3C2410 Clocks, (c) 2004 Simtec Electronics
CLOCK: Slow mode (1.500 MHz), fast, MPLL on, UPLL on
CPU0: D VIVT write-back cache
CPU0: I cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets
CPU0: D cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets
Built 1 zonelists
Kernel command line: mem=64M root=/dev/ram0 init=/linuxrc rw
irq: clearing subpending status 00000007
irq: clearing subpending status 00000002
PID hash table entries: 512 (order: 9, 8192 bytes)
timer tcon=00500000, tcnt a509, tcfg 00000200,00000000, usec 00001e4c
Console: colour dummy device 80x30
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 64MB = 64MB total
Memory: 62280KB available (808K code, 167K data, 68K init)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 1485K
S3C2410: Initialising architecture
SCSI subsystem initialized
NetWinder Floating Point Emulator V0.97 (double precision)
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
S3C2410 RTC, (c) 2004 Simtec Electronics
s3c2410-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2410
s3c2410-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2410
s3c2410-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2410
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
init started:  BusyBox v0.60.5 (2003.08.02-05:17+0000) multi-call binary
Sat Jul 26 21:42:00 UTC 2003
ifconfig: socket: Function not implemented

Please press Enter to activate this console. 


BusyBox v0.60.5 (2003.08.02-05:17+0000) Built-in shell (ash)
Enter 'help' for a list of built-in commands.

sh: can't access tty; job control turned off
stty: No such file or directory
[\u@\h \W]$uname -a
Linux LN2410 2.6.16 #1 Sun Apr 23 17:27:44 IST 2006 armv4tl unknown
[\u@\h \W]$